Enclosures
Mild Carbon Steel Enclosures
Type 1, 3R, 4, 12
View Info
Stainless Steel Enclosures
Type 1, 4x, 12
View Info
Enclosure Accessories
Type 1, 3R, 4, 4x, 12
View Info
Mild Carbon Steel Enclosures
Standard Features:
- Standard sheet metal construction (14, 12, 11, 10 & 7 gauge)
- Chemical Phosphatizing Prep, Primed & painted (inside and out)
- Seams continuously welded & ground smooth
- Oil resistant foam adhesive door gasketing (RFI, 1/4 x 3/4, 1/4 x 1)
- Bonding provision on doors and body
- Single door, single access
- Door latching (NEMA style clamp, 3-point handle, ¼ turn latch, hasp & staple, or screws)
- Door hinges (concealed, lift-off, or continuous)
- Industry Standards – UL 508 A listed
Optional Features:
- Free Standing, Wall Mounted, Modular, Junction Box, or Operator
- Dual access (front & rear)
- Multiple door or Overlapping doors (Type 1 or 12)
- Fixed or removable center posts
- Sloped top or drip shields
- Custom hole cut-outs (door & body)
- Heavy duty lift eyes or angle with reinforcement channel
- Heavy duty steel back stiffeners (maintain flatness & rigidity)
- Body stiffeners on larger enclosures
- Mechanical door interlock
- Data pocket
- Mounting Provisions (Collar studs, Unistrut, or panel supports)
- Floor stands or pedestals
- Divider plates (fixed or removable)
- Sub panels (Painted Mild Steel, Galvanized or Stainless Steel)
- Insulation (1/2, ¾ or 1” thick)
Stainless Steel Enclosures
Standard Features:
- Standard sheet metal construction (14, 12, 11, 10 & 7 gauge)
- Type 304 or 316 SS #4 Polish outside, cleaned inside
- Seams continuously welded & ground smooth
- Oil resistant foam adhesive door gasketing (RFI, 1/4 x 3/4, 1/4 x 1)
- Bonding provision on doors and body
- Single door, single access
- Door latching (NEMA style clamp, 3-point handle, ¼ turn latch, hasp & staple, or screws)
- Door hinges (concealed, lift-off, or continuous)
- Industry Standards – UL 508 A listed
Optional Features:
- Free Standing, Wall Mounted, Modular, Junction Box, or Operator
- Dual access (front & rear)
- Multiple door or Overlapping doors (Type 1 or 12)
- Primed & painted (inside and out)
- Fixed or removable center posts
- Sloped top or drip shields
- Custom hole cut-outs (door & body)
- Heavy duty lift eyes or angle with reinforcement channel
- Heavy duty steel back stiffeners (maintain flatness & rigidity)
- Body stiffeners on larger enclosures
- Mechanical door interlock
- Data pocket
- Mounting Provisions (Collar studs, Unistrut, or panel supports)
- Floor stands or pedestals
- Divider plates (fixed or removable)
- Sub panels (Painted Mild Steel, Galvanized or Stainless Steel)
- Insulation (1/2, ¾ or 1” thick)
Enclosure Accessories
Available Options:
- Gland Plates with gasketing (Painted Mild Steel, Type 304 or 316 Stainless Steel)
- Removable Drip shields (Painted Mild Steel, Type 304 or 316 Stainless Steel)
- Lexan window viewing kits
- Handles (3-point, pad-lockable, keyed, black plated or Type 316 Stainless Steel)
- NEMA style clamps (Painted Mild Steel or Type 316 Stainless Steel)
- 1/4 Turn Latches (Screwdriver, lockable, special tool, chrome plated or Type 316 Stainless Steel)
- Oil resistant foam adhesive door gasketing (RFI, 1/4 x 3/4, 1/4 x 1)
- Door stops (Top or Bottom Sliding Bracket mount, Cable, or Gas Shock)
- Removable center post with Buna gasket and hardware
- Removable heavy duty lift eyes, threaded (Mild Carbon Steel or Type 316 Stainless Steel)
- Mechanical door interlock bracket, spring and latch
- Data pocket (Plastic, Painted Mild Steel or Type 304 or 316 Stainless Steel)
- Removable Floor stands or pedestals (Painted Mild Steel, Type 304 or 316 Stainless Steel)
- Removable Divider plates (Painted Mild Steel, Type 304 or 316 Stainless Steel)
- Sub panels (Painted Mild Steel, Galvanized, Type 304 or 316 Stainless Steel)