Custom NEMA Enclosure manufacturer in Ashippun, WI seeking to hire a hard-working individual for a full-time position. 1st shift hours from 7:00 am to 3:30 pm.

Overtime available at peak times.

Job Description:
This position is responsible for preparing parts for wet spray paint application.

Job Responsibilities:

• Prep parts- sanding/pressure washing and hanging parts
• Prepare and apply primers/paints using HVLP pressure pots
• Coordinate Jobs- parts and equipment schedules
• Operate/Maintain/Organize Paint shop equipment and supplies
• Good communication skills and great attitude.
• Maintain understanding and control of inventory
• Operate as a team player, effectively communicating and working with production supervisor and others.
• Maintain and support a safe, clean work environment by complying with all company standards.
• Must have an “eye for detail” to continuously improve on quality, productivity and growth objectives
• May be asked to perform other duties and responsibilities as necessary.
• Ability to solve practical problems using reasoning and decision-making skills to ensure quality work
• Demonstrate enthusiasm, takes initiative, and works with a sense of urgency to meet or exceed production and quality goals.
• Must have time management skills to meet production demands.

Job Requirements:

• HS Diploma or GED
• 1-3 years of experience in role preferred
• Steel toe shoes required
• Must be able to lift and manipulate up to 35 pounds on a frequent basis
• Must be able to lift and handle up to 50 pounds using team lifting techniques on an occasional basis
• Must be able to work for 7 to 9 hours per day without sitting

Compensation:
Competitive pay range per hour depending on qualifications.

Pay checks every week, direct deposit, and offer a competitive benefits package: Medical, Dental, Vision, 401K, Vacation, Holiday Pay, Continuing Education, etc.

At a minimum, background check, education verification, employment verification, and a drug screen will be conducted upon hire. Your suitability for employment is contingent upon successfully passing these pre-employment screenings.

If you feel your knowledge and experience is a good fit for this position please send us your resume or fill out an application.
Apply Now

Custom NEMA enclosure manufacturer in Ashippun, WI seeking to hire a hard-working individual for a full-time position. 1st shift hours from 7:00 am to 3:30 pm.

Overtime available at peak times.

Job Description:
This position is responsible for fit-up and welding of light gauge sheet steel using .035 Mig wire.

Job Responsibilities:

• Other job details include fabrication, sawing, and assembly. Ability to operate hand/air tools and electric grinders.
• Read and interpret prints and drawings.
• Must be able to lift up to 50 pounds regularly.
• Good communication skills and great attitude.
• Maintain understanding and control of inventory
• Operate as a team player, effectively communicating and working with production supervisor and others.
• Maintain and support a safe, clean work environment by complying with all company standards.
• Must have an “eye for detail” to continuously improve on quality, productivity and growth objectives
• May be asked to perform other duties and responsibilities as necessary.
• Ability to solve practical problems using reasoning and decision-making skills to ensure quality work
• Demonstrate enthusiasm, takes initiative, and works with a sense of urgency to meet or exceed production and quality goals.
• Must have time management skills to meet production demands.

Job Requirements:

• HS Diploma or GED
• 1-3 years of experience in role preferred
• Steel toe shoes required
• Must be able to lift and manipulate up to 35 pounds on a frequent basis
• Must be able to lift and handle up to 50 pounds using team lifting techniques on an occasional basis
• Must be able to work for 7 to 9 hours per day without sitting

Compensation:
Competitive pay depending on qualifications

Pay checks every week, direct deposit, and offer a competitive benefits package: Medical, Dental, Vision, 401K, Vacation, Holiday Pay, Continuing Education, etc.

At a minimum, background check, education verification, employment verification, and a drug screen will be conducted upon hire. Your suitability for employment is contingent upon successfully passing these pre-employment screenings

If you feel your knowledge and experience is a good fit for this position please send us your resume or fill out an application.
Apply Now

Custom NEMA enclosure manufacturer in Ashippun, WI seeking to hire a hard working individual for a full time position. 1st shift hours from 7:00 am to 3:30 pm.

Overtime available at peak times.

Job Description:
This position is responsible for the forming of fabricated sheet metal components using CNC operated equipment.

Job Responsibilities:

• Read, interpret, and follow basic schematics, drawings and bill of material
• Handle punch and die installation and set up
• Knowledge of various types of material and forming calculations
• Perform routine maintenance and maintain schedule
• Efficiently pick necessary components and materials for forming
• Handle, Lift and move material/inventory from stock location to fabrication area
• Maintain understanding and control of CNC equipment
• Use and understand basic computer programs and features, math and reading skills
• Operate certified equipment after appropriate training
• Operate as a team player, effectively communicating and working with production supervisor and others
• Maintain and support a safe, clean work environment by complying with all company standards
• Must have an “eye for detail” to continuously improve on quality, productivity and growth objectives
• May be asked to perform other duties and responsibilities as necessary
• Ability to solve practical problems using reasoning and decision making skills to ensure quality work
• Demonstrate enthusiasm, takes initiative, and works with a sense of urgency to meet or exceed production and quality goals
• Must have time management skills to meet production demands

Job Requirements:

• HS Diploma or GED
• 1-3 years of experience in role preferred
• Steel toe shoes required
• Must be able to lift and manipulate up to 35 pounds on a frequent basis
• Must be able to lift and handle up to 50 pounds using team lifting techniques on an occasional basis
• Must be able to work for 7 to 9 hours per day without sitting

Compensation:
Competitive pay depending on qualifications

Pay checks every week, direct deposit, and offer a competitive benefits package: Medical, Dental, Vision, 401K, Vacation, Holiday Pay, Continuing Education, etc.

At a minimum, background check, education verification, employment verification, and a drug screen will be conducted upon hire. Your suitability for employment is contingent upon successfully passing these pre-employment screenings

If you feel your knowledge and experience is a good fit for this position please send us your resume or fill out an application.

Apply Now

Custom NEMA enclosure manufacturer in Ashippun, WI seeking to hire a hard working individual for a full time position. 1st shift hours from 7:00 am to 3:30 pm.

Overtime available at peak times.

Job Description:

This position is responsible for mounting and installing components onto assemblies, performing sub-assembly functions, and preparing products for shipment.

Job Responsibilities:

• Read, interpret, and follow basic schematics, drawings and bill of material
• Operate hand tools, torque drivers, and pneumatic tools
• Perform installation of components on NEMA enclosures including handles, hardware and gasketing
• Efficiently pick necessary components and materials for assembly
• Handle, Lift and move material/inventory from stock location to assembly area
• Maintain understanding and control of inventory
• Use and understand basic computer programs and features, math and reading skills
• Operate certified equipment after appropriate training
• Operate as a team player, effectively communicating and working with production supervisor and others
• Maintain and support a safe, clean work environment by complying with all company standards
• Must have an “eye for detail” to continuously improve on quality, productivity and growth objectives
• May be asked to perform other duties and responsibilities as necessary
• Ability to solve practical problems using reasoning and decision making skills to ensure quality work
• Demonstrate enthusiasm, takes initiative, and works with a sense of urgency to meet or exceed production and quality goals
• Must have time management skills to meet production demands

Job Requirements:

• HS Diploma or GED
• 1-3 years of experience in role preferred
• Steel toe shoes required
• Must be able to lift and manipulate up to 35 pounds on a frequent basis
• Must be able to lift and handle up to 50 pounds using team lifting techniques on an occasional basis
• Must be able to work for 7 to 9 hours per day without sitting

Compensation:

Competitive pay depending on qualifications

Pay checks every week, direct deposit, and offer a competitive benefits package: Medical, Dental, Vision, 401K, Vacation, Holiday Pay, Continuing Education, etc.

At a minimum, background check, education verification, employment verification, and a drug screen will be conducted upon hire. Your suitability for employment is contingent upon successfully passing these pre-employment screenings

If you feel your knowledge and experience is a good fit for this position please send us your resume or fill out an application.

Apply Now